Biovault Biometric Safe-How to Enroll New Users

So you purchased your Biovault 2.0 biometric safe and set it up a long time ago.  Now you want to add another user to the safe to allow them to access it.  Here is how you enroll another user on the Biovault.

1. If your BioVault 2.0 is not on, press any key to activate unit.
2. To Enroll the first User, select the Admin feature from the main menu and press the button.
3. Scroll to Enroll, by using the button and press the button.
4. BioVault 2.0 will then prompt you to swipe your finger three times by displaying “1 of 3” on the screen and the green lights will light up around the sensor area.
5. Place your finger over the sensor with the tip of your finger at the top of the finger guide.
6. Make sure you have good, flat contact with the sensor. As soon as the green lights turn to orange lights, begin to swipe your finger from Position 1 to Position 2 taking 1 to 2 seconds to complete the swipe. Try to get your entire fingerprint to cross the sensor. The orange lights indicate a scan is in progress. The orange lights will stay on until the swipe is complete.
7. After the first scan is complete, your fingerprint will be displayed on the LCD.
8. The lights will turn green again, indicating the first swipe was successful. The screen will display “2 of 3” indicating that the scanner is ready for the second swipe, repeat Step 6 then the screen will display “3 of 3” prompting for the final swipe, repeat Step 6 for a third time.

Thank is all there is to it!  You have successfully enrolled another user into the memory on your Biovault Biometric Safe.